YellowSquared  /  Field notes

Notes from the workshop

18 posts, newest first. Choose an app to narrow the feed.

017 / 18

How to Light a Small Product With a Phone Screen

A bright phone or tablet screen can light a small object when it is close enough and the surrounding light is controlled. The screen provides a broad, movable patch of light. That patch can reveal the curve of a watch, bottle or piece of jewellery.

Try photographing a glossy mug under an overhead lamp. The handle may disappear into shadow while a bright spot crosses the glaze. Bring a white screen close to one side and watch its reflection move across the mug. Position is often more useful than adding more brightness.

The screen must look large to the object

A phone across the room is a small source. Beside a ring or watch, the same screen can occupy a large part of the object's view and produce softer shadow edges. A tablet gives you a larger illuminated area, but the apparent size still depends on distance.

Keep the screen just outside the camera frame. Start with a plain white surface and fixed brightness. Move it while watching the live view. For glossy objects, the source's reflection is part of the composition, so check the label, edges and highlights together.

Choose one of two starting setups

SetupWhat the screen doesWhat to check
Dim room, small still subjectCan act as the main lightEnough exposure, camera support and no clipped reflection
Window-lit tabletopAdds fill or a shaped reflectionWhether the screen is bright enough to make a visible difference

A screen will rarely compete with direct sunlight or a bright studio light. Move closer, reduce the competing light or use it only for a reflection. Changing exposure cannot make a weak fill source stronger relative to the other lights.

A five-minute experiment

  1. Set the product on a simple surface and support the camera.
  2. Place a second device's white screen close to one side.
  3. Take a frame with the screen off, then one with it on, keeping the camera settings fixed.
  4. Move the screen until the highlight describes the product without hiding important detail.
  5. Add a white card opposite it if the shaded side needs more light.
  6. Record the screen position and take a final frame with a neutral reference beside the product.

The off/on comparison reveals what the screen contributes. A brighter overall picture can otherwise look like better lighting when it is only a camera exposure change.

Keep colour and exposure repeatable

Automatic exposure or white balance can change as the screen moves. Lock them where the camera allows, then judge one adjustment at a time. Adaptive screen brightness and warm display modes can also change the source; keep those settings consistent during the shoot.

A coloured screen can create a deliberate warm or cool highlight. A displayed kelvin setting is not a measurement of a calibrated lamp's output, and it does not guarantee accurate product colour. For colour-critical catalogue work, use suitable lighting and a colour-managed workflow.

Watch for motion and flicker

Low light can require a longer exposure. Support the camera and keep the subject still. If you see bands or inconsistent brightness, the display and exposure timing may be interacting; try a different shutter speed and compare the frames.

Check the actual exported picture. White reflections can clip even while the rest of the product is dark. Lower the source brightness, change its angle or adjust exposure if the highlight loses the material's texture.

Save the setup that worked

Write down the camera position, screen distance, brightness, background and exposure. A quick behind-the-scenes photo can make the next session easier to reproduce. Lumet provides a screen-light surface; it remains subject to the device's brightness and display limits.

For a larger setup, compare ring lights and softboxes. Adobe's diffused-light guide explains the relationship between source size and shadow softness.

018 / 18

Colour Temperature: Changing the Light vs. Changing White Balance

Lower-kelvin light looks warmer, but raising a camera's white-balance kelvin setting can make the recorded picture warmer. Those controls seem to run in opposite directions because one changes the light and the other changes how the camera compensates for it.

Imagine a white mug beside a warm household lamp. The lamp gives it an orange cast. Tell the camera to expect warm, low-kelvin light and it compensates with more blue. Keep the lamp unchanged but choose a higher white-balance value, and the photograph can become warmer instead.

First identify which control you are changing

ControlLower kelvinHigher kelvin
An adjustable light sourceProduces warmer-looking lightProduces cooler-looking light
Camera or raw-editor white balanceCompensates for warmer light; generally cools the imageCompensates for cooler light; generally warms the image

White balance estimates the colour of the illumination so a neutral object can reproduce as neutral. It can also be used creatively, but changing it does not change the light that reached the subject.

A useful source-temperature reference

Approximate source temperatureCommon referenceWhat to remember
2,700–3,200 KWarm household lighting or tungsten-style lightActual lamps vary in spectrum and tint.
4,000–4,500 KIntermediate or neutral-looking artificial lightA label alone cannot guarantee a match.
5,000–5,600 KDaylight-style lighting referenceNatural daylight changes with conditions.
6,500 K and aboveCooler daylight, overcast or shade referencesThese are approximate examples, not fixed weather readings.

Kelvin describes the warm-to-cool axis. A green or magenta cast may require a separate tint adjustment. Two sources with the same stated temperature can still make an object look different.

Try a three-frame comparison

  1. Place a white or neutral grey reference beside the subject under one fixed light.
  2. Keep exposure constant and photograph it at three white-balance values, such as 3,000 K, 5,000 K and 7,000 K.
  3. Compare which frame makes the reference look neutral and which gives the mood you want.

Those numbers are an experiment, not recommended settings for every room.

Mixed light cannot always be corrected with one setting

A warm lamp on one side of a face and a cool window on the other can require different corrections. A single global white-balance change may improve one side while making the other worse.

Start by turning one source off, moving the subject or matching the added light more closely. If you want the colour contrast, keep it deliberate and repeatable. A neutral reference in each lighting region helps identify what is happening.

Brightness, temperature and rendering are separate

Brightness affects exposure. Colour temperature affects the source's warm-to-cool appearance. Colour rendering concerns how the source reproduces object colours. Increasing brightness is not a general fix for a tint or rendering problem.

A phone screen adds another distinction: selecting a warm colour changes the display's emitted mix of light. It does not turn the device into a calibrated lighting instrument. Use Lumet to explore screen colour and brightness, then judge the result with the camera and subject you actually use.

Keep the useful reference, then make the creative choice

For products, start with a neutral result so you can assess the material. For food or portraits, a warmer rendering may suit the scene. Save both a neutral reference frame and the chosen edit; that makes the decision easier to repeat later.

Adobe's white-balance guide explains the compensation process. For a practical small-light experiment, see lighting a product with a phone screen.